Before You Begin; After The Installation Is Complete; System Contents - Clarion UNGO MS2105 Installation Manual

Vehicle security system w/ built-in remote start & ungo-net interface
Hide thumbs Also See for UNGO MS2105:
Table of Contents

Advertisement

2. Before You Begin

• Prior to beginning the installation of the Ungo MS2105 / MS2107, be sure that
you have completely read and understand this installation manual.
• Verify all the vehicle's functions work properly prior to installation (i.e.: power
windows, power door locks, climate controls, radio, etc.)
• Check with the vehicle's owner on the location of the status LED and valet
switch.
• Protect the vehicle by using fender and seat covers.
• Double-check the location before drilling. Make sure that there are no wire
looms, hoses, or other obstructions. Failure to verify can result in serious
damage to the vehicle.
• Roll down a window(s) before beginning installation, to prevent getting locked
out of the vehicle.
• Set the Polarity Jumper inside the main unit for the Parking Lights.
Warning: Probing wires with a Test Light can result in serious damage to the
vehicle's electrical system and/or deploy air bag system.

3. After The Installation is Complete

• Verify all the vehicle's functions work properly after the installation (i.e.: power
windows, power door locks, climate controls, etc.).
• Test all functions of the vehicle security system and make any changes to the
system parameters if necessary.

4. System Contents

• Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
• 5-Button 1-way Transmitter (MS2105 / MS2107)
• 5-Button 2-way LCD Transmitter (MS2107 only) . . . . . . . . . . . . .1
• 20-Pin Main Harness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
• 2-Pin Status LED Harness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
• 2-Pin Valet Switch Harness . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
• 3-Pin Door Lock Harness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
• 4-Pin Shock Sensor Harness and Shock Sensor
• 14-Gauge Starter wires with Insulated .250 Connectors
• Window Decals
• Owner's Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
• Installation Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
-3-
. . . . . . . . . .2/1
. . . . . . . . . . . .1
. . . . . . .1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ungo ms2107

Table of Contents