Remote Configurations; Standard Configuration; Single Button Arm/Disarm Configuration - Clarion UNGO ProSecurity S100 Installation Manual

remote configurations

The remotes can be programmed with the standard or single button arm/disarm configurations by
using the Auto Learn functions in the Remote Programming Routine.

standard configuration

A remote that uses the standard configuration operates similarly to many factory keyless entry remotes.
A standard configuration remote allows arming, disarming, and Panic Mode activation with separate
buttons. When programmed for standard configuration, the remote buttons are assigned to the fol-
lowing functions:
operates Arm only
operates Disarm only
operates Silent Arm/Disarm and Channel 2
operates Panic
and
The standard configuration also allows the user to utilize Remote Sensor Bypass, a feature that cannot
be accessed from a single button arm/disarm configuration remote.

single button arm/disarm configuration

When programmed for single button arm/disarm configuration, the remote buttons are assigned to the
following functions:
operates Arm/Disarm/Panic
operates Channel 2 and Silent Mode
and
operate Channel 3
operate Channel 3
21