Table of Contents
Advertisement
diagnostics
The system's microprocessor monitors and reports all active and violated zones when arming and dis-
arming. LED flashes indicate the active or violated zone; siren chirps indicate system status.
arm/disarm diagnostics
The number of siren chirps will indicate the status of the system when arming and disarming. For infor-
mation on which zone is active or has been violated refer to the Table of Zones.
system status chirps
Action
Number of Chirps
Arm
1
Arm
1 (3 second delay), 1
Disarm
2
Disarm
4
Disarm
5
table of zones
Zone No.
Trigger type
1
Instant
2
Multiplexed
3
Two-stage, progresses from
warning to full alarm
4
Multiplexed Input
5
Two-stage (similar to doors)
N N O O T T E E : : The Warning response does not report on the LED.
22
Description
System armed
System armed with an open zone(s) bypassed
System disarmed
System disarmed with tamper alert
System disarmed false alarm prevention active
Input description
H1/6 BLUE wire. Connect to optional hood/trunk
pins.
BLUE wire of plug-in shock sensor. Inputs
shorter than 0.8 seconds will trigger a Warning
Zone response, while inputs longer than 0.8
seconds will instantly trigger the full alarm
sequence.
Door switch circuit. H1/5 GREEN or H1/7 VIOLET.
GREEN wire of plug-in shock sensor. Inputs
shorter than 0.8 seconds will trigger a Warning
Zone response, while inputs longer than 0.8
seconds will instantly trigger the full alarm
sequence.
Ignition input. H1/9 YELLOW.
Hide quick links:
Advertisement
Table of Contents
