Table of Contents
Advertisement
®
Isys
12" Wall Mount Touch Screen
Diagnostics
®
36 • Isys
12" Wall Mount Touch Screen: TPMC-12L
Standby Details
The Standby function turns off the backlight when the touch screen is inactive for a
specified time. Use the Up and Down buttons to set the Standby from 0 through 120
minutes, where 0 disables the timeout. Touch the screen to reactivate the touch
screen from standby mode. When the touch screen is reactivated, the last screen to be
displayed reappears.
NOTE: The hard buttons will still function when the touch screen is in standby
mode but will not cause it to awaken from standby. You must touch the screen to
reactivate the touch screen.
Hard Button Backlight Details
The Hard Button Backlight can be varied from 0 to 100. To increase the brightness,
touch Up. To decrease the brightness, touch Down.
Misc. Controls Details
The Misc. Controls section of the setup menu contains the Diagnostics and
Keyboard buttons.
Touch Diagnostic to display the firmware version number, see Installed Packs and
to reset the end user license from the "Diagnostics" window.
"Diagnostics" Window
Reset CTP Port resets the default value of the CTP port to 41795, for terminal
connection using Crestron Toolbox.
To configure the appearance of popup messages, touch Configure Messages. The
"Message Popup Configuration" window will open.
Crestron TPMC-12L
Operations Guide – DOC. 6686C
Advertisement
Table of Contents
