Related Manuals for Crestron TPMC-V12-WALL
Summary of Contents for Crestron TPMC-V12-WALL
- Page 1 Crestron TPMC-V12-WALL, V12-WALL & WMKC-V12 Wall Mount & Chassis Wall Mount Kits for TPMC-V12 & V12 Installation Guide...
- Page 2 Rockleigh, NJ 07647 1-888-CRESTRON Regulatory Compliance As of the date of manufacture, the TPMC-V12-WALL, V12-WALL and WMKC-V12 have been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling. Federal Communications Commission (FCC) Compliance Statement This device complies with part 15 of the FCC Rules.
-
Page 3: Table Of Contents
Crestron TPMC-V12-WALL, V12-WALL & WMKC-V12 Wall Mount Kits Contents Wall Mount & Chassis Wall Mount Kits for TPMC-V12 & V12: TPMC-V12-WALL, V12-WALL & WMKC-V12 Description..........................1 Setup ............................7 Supplied Hardware ...................... 7 Installation ........................8 Resources..........................13 Reference Documents....................13 Further Inquiries ...................... -
Page 5: Wall Mount & Chassis Wall Mount Kits For Tpmc-V12 & V12: Tpmc-V12-Wall, V12-Wall & Wmkc-V12
The Installation Guides for the TPMC-V12 and V12 mounting options are available from the Crestron Web site (www.crestron.com/manuals). The TPMC-V12-WALL is a pre-assembled TPMC-V12 with chassis wall mount kit (WMKC-V12). This model consists of a TPMC-V12 Integrated 12” Touchpanel mounted inside of a chassis and is ready for mounting in a wall or similar flat surface. - Page 6 Using the WMKC-V12, a TPMC-V12, TPMC-V12-TILT, V12 or V12-TILT model can be effectively converted to the equivalent of a TPMC-V12-WALL or V12-WALL. The kit consists of a VESA mount, metal chassis and a magnetic bezel. It is available in black or white.
- Page 7 Crestron TPMC-V12-WALL, V12-WALL & WMKC-V12 Wall Mount Kits The dimensions of the TPMC-V12-WALL, V12-WALL and WMKC-V12 are shown below. TPMC-V12-WALL and V-12-WALL Overall Dimensions (Front, Side and Rear Views – Without Bezel) 1.80 in (46 mm) 12.67 in 1.69 in...
- Page 8 Wall Mount Kits Crestron TPMC-V12-WALL, V12-WALL & WMKC-V12 TPMC-V12-WALL and V12-WALL Overall Dimensions (Front and Side Views - With Bezel) 13.04 in (332 mm) 2.01 in (52 mm) 11.54 in (293 mm) 4 • Wall Mount Kits:TPMC-V12-WALL, V12-WALL & WMKC-V12...
- Page 9 (267 mm) 12.11 in (308 mm) VESA Mounting Bracket Overall Dimensions (Front and Side Views) 4.50 in 0.32 in (115 mm) (8 mm) 4.50 in (115 mm) Wall Mount Kits: TPMC-V12-WALL, V12-WALL & WMKC-V12 • 5 Installation Guide – DOC. 6893B...
- Page 10 Wall Mount Kits Crestron TPMC-V12-WALL, V12-WALL & WMKC-V12 Bezel Overall Dimensions (Front and Side Views) 13.04 in (332 mm) 0.33 in (9 mm) 11.54 in (294 mm) 6 • Wall Mount Kits:TPMC-V12-WALL, V12-WALL & WMKC-V12 Installation Guide – DOC. 6893B...
-
Page 11: Setup
The WMKC-V12 consists of six parts: a mounting plate, chassis, bezel and three sets of mounting screws. The final assembled product is the TPMC-V12-WALL or V12-WALL. The hardware supplied with the TPMC-V12-WALL and V12-WALL is listed in the following table. Supplied Hardware for the TPMC-V12-WALL and V12-WALL... -
Page 12: Installation
This section provides assembly and installation procedures for the Wall Mount and Chassis Wall Mount Kits. The “WMKC-V12 Procedure” starts below and the “TPMC-V12-WALL and V12-WALL Procedure” starts on page 10. Be sure to review each procedure before starting. WMKC-V12 Procedure This section provides the necessary steps for the assembly of a TPMC-V12 Integrated 12”... - Page 13 VESA Mounting Bracket TPMC-V12 (2023927) or V12 Panel 3. Follow the TPMC-V12-WALL and V12-WALL procedure on the following page to install the assembly into a V12 mounting option. Wall Mount Kits: TPMC-V12-WALL, V12-WALL & WMKC-V12 • 9 Installation Guide – DOC. 6893B...
- Page 14 TPMC-V12-WALL and V12-WALL Procedure This section provides the necessary steps for the installation of the TPMC-V12-WALL or V12-WALL into a V12 mounting option. It is assumed that wiring has been run and an appropriate V12 mounting option has been installed according the instructions in the latest version of its Installation Guide.
- Page 15 5. Observing the orientation of the word BOTTOM on the back of the magnetic bezel, place the bezel over the touchpanel. Refer to the illustration on the following page. Wall Mount Kits: TPMC-V12-WALL, V12-WALL & WMKC-V12 • 11 Installation Guide – DOC. 6893B...
- Page 16 Wall Mount Kits Crestron TPMC-V12-WALL, V12-WALL & WMKC-V12 Mount Bezel to TPMC-V12 or V12 Touchpanel Bezel (4509645 or 4509644) 12 • Wall Mount Kits:TPMC-V12-WALL, V12-WALL & WMKC-V12 Installation Guide – DOC. 6893B...
-
Page 17: Resources
Crestron's award winning customer service team by calling Crestron at 1-888-CRESTRON [1-888-273-7876]. You can also log onto the online help section of the Crestron Web site (www.crestron.com/onlinehelp) to ask questions about Crestron products. First-time users will need to establish a user account to fully benefit from all available features. -
Page 18: Return And Warranty Policies
Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty, if any. CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended or if it has been subjected to misuse, accidental damage, modification or improper installation procedures. - Page 19 Crestron TPMC-V12-WALL, V12-WALL & WMKC-V12 Wall Mount Kits This page is intentionally left blank. Wall Mount Kits: TPMC-V12-WALL, V12-WALL & WMKC-V12 • 15 Installation Guide – DOC. 6893B...
- Page 20 Crestron Electronics, Inc. Installation Guide – DOC. 6893B 15 Volvo Drive Rockleigh, NJ 07647 (2025426) Tel: 888.CRESTRON 02.11 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.