Usb Menu - Bosch B450 Installation & Operation Manual

28 en | Configuration
Main Menu
0 Main Menu
Status
1 Basic Status Menu
(Starts with
2
Basic Status) Advanced Status Menu
1
Reset Status
3
Signal Strength
4
5
Product Versions
Change
Passcode
2
0
Main Menu
1
Basic TCP/UDP Port Number: 7700
Configuration
2
AES Encryption: Disabled
3
3
Tamper: Disabled
4
Panel Programming: Enabled
5
SMS Configuration: Enabled
6
Reporting Delay for Low Signal Strength (sec.): 1800
0
Main Menu
1
IPv4 DNS Server IP Address: 0.0.0.0
Advanced
Configuration 2
Alternate IPv4 DNS Server IP Address: 0.0.0.0
4
3
Modem Reset Count: 5
4
Reporting Delay for No Towers (sec.): 1800
Reset to 5
Reporting Delay for Single Tower (sec.): Disabled
Factory Defaults
6
TCP Keep Alive Time (sec.): 45
5
0 Main Menu
Diagnostic Log*
1 Modify Diagnostic Settings
6
2 Re-Print all Console Messages
3 Enable Live Console Messages
Firmware
Update
7
Save and Exit
8
Exit
9
* The Diagnostic Log option is used in troubleshooting communication issues with the B450. Use of the Diagnostic Log option is to be used
only at the direction of TECHNICAL SUPPORT.
Figure 5.10: USB menu structure
Notice!
Changes or edits to programming are discarded if you select the Exit option, and exit the
menu. If you make changes or edits, select the Save and Exit option to ensure programming
changes are saved.
5.3.5

USB menu

For a description of the USB option menu items, refer to the tables in the following sections.
To go to a specific menu option, enter the appropriate menu option.
Notice!
Any and all changes are lost and will have to be re-programmed if there is inactivity (last key
press) within the Tera Term USB session within a 5-minute duration of time.
Using the Escape (Esc) key
Press the Escape (Esc) key without making any programming changes will return you to the
previous menu.
Pressing the Escape key after entering data will clear data entered.
2013.09 | 02 | F.01U.282.875
0
Diagnostic Log Menu
1
Cellular Modem Verbose Mode: Disabled
2
Bus Communications Verbose Mode: Disabled
3
Network Communications Verbose Mode: Disabled
4
Network Operations Verbose Mode: Disabled
5
Module Operations Verbose Mode: Disabled
6
Disable All Verbose Modes
Installation and Operation Guide
Conettix Plug-in Communicator
Interface
Bosch Security Systems, Inc.