Install A Communication Program - Bosch B450 Installation & Operation Manual

24 en | Configuration
5.3.1

Install a communication program

To use USB connection from a computer to the B450 to configure the B450, you must use a
communication program.
–
–
Install the communication program that supports your configuration (Hyper Terminal or Tera
Term), depending on your laptop or PC's operating system.
Notice!
Tera Term is preferred in all applications as its operation is understood by Bosch Technical
Support if assistance is required.
Installing Tera Term
When you perform the Tera Term installation, follow the prompts in the installation wizard,
but on the Select Components page of the wizard, select Compact installation from the drop-
down list. Refer to the figure below.
Figure 5.6: Setup - Tera Term wizard's Select Components window
Tera Term version interface
After installing the latest Tera Term version, double-click on Tera Term to launch the program.
The Tera Term window opens.
2013.09 | 02 | F.01U.282.875
Windows XP. The Microsoft Windows XP installation automatically installs HyperTerminal,
a Microsoft communication program, when Windows installs. If HyperTerminal is not
installed, install it from the Windows XP installation disc, or install Tera Term from the
B450 CD.
Windows Vista and Windows 7/8 installations no longer include a communication
program when the operating system installs. Install Tera Term from the B450 CD.
Installation and Operation Guide
Conettix Plug-in Communicator
Interface
Bosch Security Systems, Inc.