Table of Contents
Advertisement
40
en | Maintenance and troubleshooting
8.
9.
10. Log into Tera Term to reestablish the connection. Communication between the control
6.2
USB menu access disabled
A Menu access disabled error message occurs when the Web/USB Access Enabled feature in
RPS is set to No when connected to a GV4 Series v2.03+ or B Series v2.03+ control panel.
Enabling USB
1.
2.
3.
4.
5.
2018.10 | 10 | F.01U.300.740
When the file transfer completes, the Tera Term: XMODEM Send dialog box closes. A Tera
Term window show a message about updating to firmware version "x.xx.xxx", and the
module automatically reboots.
Close the Tera Term session, and relaunch Tera Term.
panel and module restores.
Launch your session of RPS.
Log into RPS.
Select the correct control panel.
Select SDI2 MODULES > IP Communicator.
Double-click on Web/USB Access Enable, and select Yes. This allows you to view or
change information from the module USB menu.
Installation Manual
Conettix Plug-in Communicator
Bosch Security Systems, Inc.
Advertisement
Table of Contents
