Maintenance And Troubleshooting; Led Status Indicators - Bosch B450 Installation & Operation Manual

Conettix Plug-in Communicator
Interface
6

Maintenance and troubleshooting

6.1

LED status indicators

The B450 includes the following on-board LEDs to assist with troubleshooting:
–
–
–
The plug-in module also includes LEDs for troubleshooting and status.
Flash pattern
Flashes once every 1 sec
3 quick flashes every 1 sec
On Steady
Off
Table 6.1: Heartbeat LED descriptions
Flash pattern
RX (Receive) Flashing
TX (Transmit) Flashing
Table 6.2: RX and TX LED descriptions
Plug-in communicator LEDs
For communicator LED information, refer to the compatible communicator documentation.
Bosch Security Systems, Inc.
Heartbeat (system status).
RX (receive).
TX (transmit).
Installation and Operation Guide
Maintenance and troubleshooting | en
Function
Normal state. Indicates normal operation.
Communication error state. Indicates a bus
communication error with the control panel.
Trouble state. Indicates a trouble condition
exists. Examine the other LEDs to determine
the trouble condition.
LED trouble state. Indicates the module is
not powered up, or there is a failure in the
module. Check for proper installation.
Function
Occurs every time a packet is received on-air.
Occurs every time a packet is transmitted on-
air.
39
2013.09 | 02 | F.01U.282.875