Usb Menu Access Disabled - Bosch B450 Installation And Operation Manual

40 en | Maintenance and troubleshooting
8.
9.
10. Log into Tera Term to reestablish the connection. Communication between the control
6.2

USB menu access disabled

A Menu access disabled error message occurs when the Web/USB Access Enabled feature in
RPS is set to No when connected to a GV4 Series v2.03+ or B Series v2.03+ control panel.
Enabling USB
1.
2.
3.
4.
5.
2017.10 | 09 | F.01U.300.740
When the file transfer completes, the Tera Term: XMODEM Send dialog box closes. A Tera
Term window show a message about updating to firmware version "x.xx.xxx", and the
B450 automatically reboots.
Close the Tera Term session, and relaunch Tera Term.
panel and B450 restores.
Launch your session of RPS.
Log into RPS.
Select the correct control panel.
Select SDI2 MODULES > IP Communicator.
Double-click on Web/USB Access Enable, and select Yes. This allows you to view or
change information from the B450 USB menu.
Installation and Operation Guide
Conettix Plug-in Communicator Interfaces
Bosch Security Systems, Inc.