System Overview; Module Overview - Bosch B450 Installation & Operation Manual

Conettix Plug-in Communicator
Interface
3

System overview

Refer to the graphic below for the complete B450 system configuration.
B450 system connections overview
Callout ᅳ Description
1 ᅳ Compatible Bosch control panel
2 ᅳ Panel data bus (SDI2 , SDI, or Option)
3 ᅳ B450
4 ᅳ USB direct connection for B450
configuration (if required)
5 ᅳ B44x Plug-in Cellular Communicator
(required and available separately)
3.1

Module overview

The B450 Conettix Plug-in Communicator Interface (wired to a compatible control panel) is a
four-wire powered SDI2, or SDI device that provides two-way communication over commercial
cellular networks using a plug-in communicator.
The B450 Conettix Plug-in Communicator Interface bus address switch determines the bus
address of the device. When required, configuration of the module is managed through the
control panel, a local USB connection, or using SMS.
Bosch Security Systems, Inc.
1
2
Installation and Operation Guide
4
3
7
6
5
Callout ᅳ Description
6 ᅳ Cellular carrier network
7 ᅳ Internet/LAN/WAN
8 ᅳ Remote Programming Workstation
9 ᅳ Bosch Conettix IP receiver (D6600,
D6100i, or D6100IPv6)
System overview | en
8
9
2013.09 | 02 | F.01U.282.875
7