Table of Contents
Advertisement
ICP-CC404 | Installation Guide | 6.0
The default Master Code is 2580 and is
User Code 1. You can program multiple
Master Codes. Refer to Section 13.3
User Code Priority on page 52 for more
information.
To access a Master Code function, enter the Master
Code and press the corresponding function digit and
the [AWAY] button. The Master Code functions are
listed in Table 25.
Table 25:
Master Code Functions
Function
Description
0
Reserved
1
Add, change, and delete User
Codes/Remote Radio User Codes
(Sections 6.2.1 on page 32 and 6.2.2 on
page 32)
2
Change domestic phone numbers
(Section 6.2.3 on page 33)
3
Change Telco Arm or Disarm Sequence
(Section 6.2.4 on page 34)
4
Set zones for STAY Mode 2
(Section 6.2.5 on page 35)
5
Turn outputs on and off
(Section 6.2.6 on page 36)
6
Set the date and time
(Section 6.2.7 on page 36)
7
Walk Test Mode
(Section 6.2.8 on page 36)
8
Event Memory Recall Mode
(Section 6.2.9 on page 36)
9
Reserved
6.2.1
Changing and Deleting User Codes
This function allows a Master Code holder to change
or delete a User Code.
1. Enter your Master Code and press [1][AWAY].
Three beeps sound and the STAY and AWAY
indicators flash.
2. Enter the number of the code (1 to 8) you want to
change and press [AWAY].
Two beeps sound and the corresponding zone
indicator lights.
3. Enter the new code and press [AWAY].
Two beeps sound and the STAY and AWAY
indicators turn off.
4. Repeat this procedure to change other User
Codes.
This function ends automatically if you do
not press a button within 60 sec or if you
press [AWAY].
One long beep indicates that the code
already exists or that you entered an
incorrect user number.
32
System Functions
Example
To program User Code number 2 as 4627, enter:
[2 5 8 0 1][AWAY][2][AWAY][4 6 2 7][AWAY]
To delete a User Code:
1. Enter your Master Code and press [1][AWAY].
Three beeps sound and the STAY and AWAY
indicators flash.
2. Enter the number of the code (1 to 8) you want to
delete and press [AWAY].
Two beeps sound and the corresponding zone
indicator lights.
3. Press [STAY] to delete the User Code.
Two beeps sound and the STAY and AWAY
indicators turn off.
4. Repeat this procedure to delete other User
Codes.
Example
To delete user code number 3, enter:
[2 5 8 0 1][AWAY][3][AWAY][STAY]
6.2.2
Changing and Deleting Remote Radio User
Codes
This function allows a Master Code holder to change
or delete a remote radio User Code.
To add or change a remote radio User Code:
1. Enter your Master Code and press [1][AWAY].
Three beeps sound and the STAY and AWAY
indicators flash.
2. Enter the number of the code (9 to 16) you want
to change and press [AWAY].
Two beeps sound and the corresponding codepad
indicators light. Refer to Table 26.
Table 26:
User
No
9
10
11
12
13
14
15
16
Bosch Security Systems, Inc. | 12/08 | F01U089401-02
This function ends automatically if you do
not press a button within 60 sec or if you
press [AWAY].
One long beep indicates that the code
already exists or that you entered an
incorrect user number.
Remote Radio Numbers Displayed by
the Codepad Indicators
Zone Indicators
1
2
3
4
5
6
7
X
X
X
X
X
X
X
MAINS
8
Indicator
X
X
X
X
X
X
X
X
- Quick Links:
- Programming
Hide quick links:
Advertisement
Table of Contents
