Lexmark Pro4000 Series User Manual page 146

Troubleshooting
Paper Tray [x] Removed
Do one or more of the following:
•
Insert the specified paper tray into the printer.
• Press to clear the message.
OK
Printer Memory Full
Try one or more of the following:
•
Depending on your printer model, touch OK or press
• From the computer, adjust the printer settings to reduce the quality of the print job, and then try printing again.
Printhead Cannot Move
Try one or more of the following:
•
Open the printer to remove any obstructions to the printhead, and then close the printer.
•
Press to clear the message.
OK
Printhead Error
There is a problem with the printhead. Contact technical support.
Printhead Warning
Clean or Deep Clean the printhead to restore print quality.
Notes:
•
Cleaning the printhead nozzles uses ink, so clean them only when necessary.
•
Deep cleaning uses more ink, so try the Clean Printhead option first to save ink.
•
If the ink levels are too low, then you must replace the ink cartridges before you can clean the printhead
nozzles.
•
See the User's Guide for more information on how to clean the printhead nozzles.
Replace Ink Cartridge
Try one or more of the following:
• Replace the ink cartridge with one that is supported by your printer.
• Press to clear the message.
OK
•
See the User's Guide or visit the Lexmark Support Web site at http://support.lexmark.com for a list of supported
ink cartridges.
Scanned Document Too Long
The scan job exceeds the maximum number of pages. Press
to clear the message, and then try printing again.
OK
to clear the message and cancel the current scan job.
146