Lexmark Pro4000 Series User Manual page 104

Networking
Encryption
Check the encryption method used on your network.
Note: Some authentication types may be available only in select printer models or operating systems.
Authentication type Encryption method
Open Mode
Shared Mode
WPA Personal
WPA2‑Personal
WPA2‑Enterprise
802.1X ‑ RADIUS
Installing the printer on a wireless network
Before you begin, make sure that:
•
Your wireless network is set up and working properly.
•
The computer you are using is connected to the same wireless network where you want to set up the printer.
• You know the network name (SSID) and the WEP key or WPA/WPA2 preshared key/passphrase of the wireless
network you want to connect to.
For Windows users
1
Close all open software programs.
2
Insert the Software and Documentation CD.
If the installation dialog does not appear after a minute, then launch the CD manually:
a
Click , or click Start and then click Run.
b
In the Start Search or Run dialog, type D:\setup.exe, where D is the letter of your CD or DVD drive.
c
Press Enter, or click OK.
3
Click Install, and then follow the instructions on the computer screen.
Note: Select Wireless connection when prompted to select a connection type.
•
None
•
WEP
WEP
TKIP
•
TKIP
•
AES
•
TKIP
•
AES
• None
•
WEP‑DynamicKeys
•
WEP‑StaticKeys
•
WPA‑TKIP
•
WPA‑AES
104