Figure 17 Isp Connection: Pppoe/Pppoa; Table 8 Isp Connection: Static Ip Address - ZyXEL Communications P-660RU-Tx User Manual

The following table describes the fields in this screen.
Table 8 ISP Connection: Static IP Address
LABEL
VPI
VCI
IP Address
Subnet mask
ISP Gateway
Connection
Type
BACK
NEXT
EXIT
Figure 17
P-660RU-Tx User's Guide
DESCRIPTION
Enter the VPI assigned to you. This field may already be configured. VPI
defines a virtual circuit. Refer to the appendix for more information.
Enter the VCI assigned to you. This field may already be configured. VCI
defines a virtual circuit. Refer to the appendix for more information.
Type your ISP assigned IP address in this field.
Enter a subnet mask in dotted decimal notation.
Refer to the appendix to calculate a subnet mask If you are implementing
subnetting.
Specify a gateway IP address supplied by your ISP.
Select the multiplexing method used by your ISP from the drop-down list
box.
Available options are: 1483 Bridged IP LLC, 1483 Bridged IP VC-Mux,
1483 Routed IP LLC(IPoA) and 1483 Routed IP VC-Mux.
Click this to return to the previous screen without saving.
Click this to continue to the next wizard screen.
Click this to close the wizard screen without saving.
ISP Connection: PPPoE/PPPoA
Chapter 6 Quick Start Wizard
55