Static Route; Chapter 9 Static Route; Overview; What You Can Do In The Static Route Screens - ZyXEL Communications P-660RU-Tx User Manual

C
H A P T E R

9.1 Overview

The P-660RU-Tx usually uses the default gateway to route outbound traffic from
computers on the LAN to the Internet. To have the P-660RU-Tx send data to
devices not reachable through the default gateway, use static routes.
For example, the next figure shows a computer (A) connected to the P-660RU-Tx's
LAN interface. The P-660RU-Tx routes most traffic from A to the Internet through
the P-660RU-Tx's default gateway (R1). You create one static route to connect to
services offered by your ISP behind router R2.

Figure 31 Example of Static Routing Topology

A

9.1.1 What You Can Do in the Static Route Screens

• Use the Routing Table List screen
routes on the P-660RU-Tx.
• Use the Static Route screen
routes on the P-660RU-Tx.
P-660RU-Tx User's Guide
LAN
WAN
(Section 9.2.1 on page

Static Route

R1
R2
(Section 9.2 on page 86) to view static
87) to add or edit IP static
9
85