Table of Contents
Advertisement
22.2 The Firmware Screen
Use this screen to manage configuration files and upload firmware to your P-
660RU-Tx.
Firmware Upgrade
Follow the instructions in this screen to upload firmware to your P-660RU-Tx. The
upload process uses HTTP (Hypertext Transfer Protocol) and may take up to two
minutes. After a successful upload, the system will reboot. See
page 153
for upgrading firmware using FTP/TFTP commands.
Do NOT turn off the P-660RU-Tx while firmware upload is in
progress!
Romfile Backup
Romfile backup allows you to back up (save) the P-660RU-Tx's current
configuration to a file on your computer. Once your P-660RU-Tx is configured and
functioning properly, it is highly recommended that you back up your configuration
file before making configuration changes. The backup configuration file will be
useful in case you need to return to your previous settings.
Click Maintenance > Firmware to open the following screen.
Figure 75 Maintenance > Firmware
The following table describes the labels in this screen.
Table 45 Maintenance > Firmware
LABEL
Current Firmware
Version
New Firmware
Location
P-660RU-Tx User's Guide
DESCRIPTION
This is the present firmware version and the date created.
Click Browse... to find the .bin file you want to upload.
Remember that you must decompress compressed (.zip) files
before you can upload them.
Chapter 22 Firmware
Section 22.1.3 on
157
Hide quick links:
Advertisement
Table of Contents
