P-660Ru-Tx Access And Login - ZyXEL Communications P-660RU-Tx User Manual

Chapter 25 Troubleshooting
Inspect your cables for damage. Contact the vendor to replace any damaged
3
cables.
Turn the P-660RU-Tx off and on.
4
If the problem continues, contact the vendor.
5

25.2 P-660RU-Tx Access and Login

I forgot the IP address for the P-660RU-Tx.
The default IP address is 192.168.1.1.
1
If you changed the IP address and have forgotten it, you might get the IP address
2
of the P-660RU-Tx by looking up the IP address of the default gateway for your
computer. To do this in most Windows computers, click Start > Run, enter cmd,
and then enter ipconfig. The IP address of the Default Gateway might be the IP
address of the P-660RU-Tx (it depends on the network), so enter this IP address
in your Internet browser.
If this does not work, you have to reset the device to its factory defaults. See
3
Section 1.6 on page
I forgot the password.
The default password is 1234.
1
If this does not work, you have to reset the device to its factory defaults. See
2
Section 1.6 on page
I cannot see or access the Login screen in the web configurator.
Make sure you are using the correct IP address.
1
• The default IP address is 192.168.1.1.
• If you changed the IP address
address.
164
29.
29.
(Section 8.2 on page 77), use the new IP
P-660RU-Tx User's Guide