Before You Begin; Table 43 Filename Conventions - ZyXEL Communications P-660RU-Tx User Manual

Chapter 22 Firmware
This is a sample FTP session showing the transfer of the computer file
"firmware.bin" to the P-660RU-Tx.
ftp> get rom-0 config.cfg
This is a sample FTP session saving the current configuration to the computer file
"config.cfg".
If your (T)FTP client does not allow you to have a destination filename different
than the source, you will need to rename them as the P-660RU-Tx only recognizes
"rom-0" and "ras". Be sure you keep unaltered copies of both files for later use.
The following table is a summary. Please note that the internal filename refers to
the filename on the P-660RU-Tx and the external filename refers to the filename
not on the P-660RU-Tx, that is, on your computer, local network or FTP site and so
the name (but not the extension) may vary. After uploading new firmware, see the
Status screen to confirm that you have uploaded the correct firmware version.

Table 43 Filename Conventions

FILE TYPE
Configuration
File
Firmware
FTP Restrictions
FTP will not work when:
You have disabled the FTP service in the Remote Management screen.
1
The IP you entered in the Secured Client IP field does not match the client IP. If it
2
does not match, the device will disallow the FTP session.

22.1.2 Before You Begin

Make sure the FTP service has not been disabled in the Remote Management
screen.
152
INTERNAL
EXTERNAL NAME
NAME
Rom-0 This is the configuration filename on the P-
660RU-Tx. Uploading the rom-0 file
replaces the entire ROM file system,
including your P-660RU-Tx configurations,
system-related data (including the default
password), the error log and the trace log.
Ras This is the generic name for the ZyNOS
firmware on the P-660RU-Tx.
DESCRIPTIO
N
*.rom
*.bin
P-660RU-Tx User's Guide