What You Can Do In The Qos Screens; What You Need To Know About Qos; Figure 40 Qos Example - ZyXEL Communications P-660RU-Tx User Manual

Chapter 11 Quality of Service (QoS)
these two classes are assigned priority queue based on the internal QoS mapping
table on the P-660RU-Tx.

Figure 40 QoS Example

VoIP: Queue 6
Boss: Queue 5
IP=192.168.1.23

11.1.1 What You Can Do in the QoS Screens

• Use the QoS screen
the P-660RU-Tx.
• Use the QoS Settings Summary screen
the summary of QoS rules and actions you configured for the P-660RU-Tx.

11.1.2 What You Need to Know About QoS

802.1p
QoS is used to prioritize source-to-destination traffic flows. All packets in the same
flow are given the same priority. 802.1p is a way of managing traffic in a network
by grouping similar types of traffic together and treating each type as a class. You
can use 802.1p to give different priorities to different packet types.
Tagging and Marking
In a QoS class, you can configure whether to add or change the DiffServ Code
Point (DSCP) value, IEEE 802.1p priority level and VLAN ID number in a matched
packet. When the packet passes through a compatible network, the networking
device, such as a backbone switch, can provide specific treatment or service
based on the tag or marker.
Finding Out More
See Section 11.3 on page 106
102
(Section 11.2 on page
(Section 11.2.1 on page
for advanced technical information on QoS.
DSL
50 Mbps
103) to configure QoS settings on
P-660RU-Tx User's Guide
105) to check