Cisco ASR 903 Release Notes page 139

Chapter
Conditions: Occurs when you configure multiple ATM IMA interfaces with fewer than 16 links per
bundle.
Workaround: Perform a hard OIR on the interface module.
CSCua56761
•
Symptoms: Gigabit Ethernet port 0/5/1 does not timestamp Ethernet OAM Y.1731 packets.
Conditions: Occurs when you configure Ethernet OAM on port 0/5/1 of a copper or SFP Gigabit
Ethernet interface module.
Workaround: There is no workaround.
CSCua61909
•
Symptoms: Changes to the police QoS command do not take effect.
Conditions: Occurs under the following conditions:
–
–
Workaround: Remove the policy from the interface, make the necessary changes, and re-attach the
policy.
CSCua67795
•
Symptoms: The router does not transmit Y.1731 Delay Measurement Message (DMM) values using
QinQ encapsulation.
Conditions: Occurs with the following configuration:
–
–
–
–
Workaround: There is no workaround.
CSCua70585
•
Symptoms: The router does not update Gigabit Ethernet interface bitmaps after you remove an EFP
from a multicast group. The router can display CPU hog messages.
Conditions: Occurs under the following conditions:
–
–
–
–
Workaround: There is no workaround.
CSCua72298
•
Symptoms: The router stops passing traffic on 10-15 HDLC interfaces.
Conditions: Occurs when you configure a large number of HDLC interfaces: 84 per port or 336 per
interface module.
Workaround: Remove and reconfigure the interface.
CSCua73104
•
OL-26630-08
You create a QoS policy with a policer and attach the policy to an interface.
You make a dynamic change to the police action such as altering the policer value,
conform-action value, or exceed-action value.
An EFP is configured and applied to a bridge-domain.
The EFP is configured with QinQ encapsulation.
A Y.1731 Delay Measurement Message (DMM) value is applied.
The Y.1731 traffic uses a CoS value other than 0.
You create an EFP on a single bridge-domain interface (BDI)
The router receives IGMP v2 or v3 SSM Joins to the BDI
You create a second EFP on the same BDI
You delete the first or second EFP.
Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router
Caveats in Cisco IOS XE 3.7S Releases
57