Cisco ASR 903 Release Notes page 135

Hide thumbs Also See for ASR 903:
Table of Contents

Advertisement

Chapter
CSCty79987
Symptoms: CFM up and down MEPs do not reach a scale of 1000 CFM sessions.
Conditions: Occurs when you configure CFM on a trunk EFP.
Workaround: There is no workaround.
CSCtz20087
Symptoms: The router applies the class-default QoS policy to all outgoing traffic.
Conditions: Occurs under the following conditions:
Workaround: There is no workaround.
CSCtz32327
Symptoms: The router crashes.
Conditions: Occurs when you perform an OIR on the OC-3 IM after an SSO switchover.
Workaround: There is no workaround.
CSCtz40690
Symptoms: Traceroute to a remote MEP fails.
Conditions: Occurs under the following conditions:
Workaround: There is no workaround.
CSCtz49927
Symptoms: Traffic floods on an EFP interface.
Conditions: Occurs when you configure a multicast static MAC on a bridge-domain and add more
than 24 EFPs.
Workaround: Remove the extra EFPs from the bridge-domain.
CSCtz55979
Symptoms: The router crashes.
Conditions: Occurs when you configure CFM, SCE over MPLS, VPLS, or G.8032 services while
running SNMP polling.
Workaround: There is no workaround.
CSCtz75641
Symptoms: The router does not pass traffic over an EVC PC port-channel.
Conditions: Occurs when you perform the following sequence of actions:
Workaround: Reload the router.
OL-26630-08
You configure multiple egress QoS policies on a Gigabit Ethernet interface.
You configure a multilink interface with no ingress QoS policy
You configure a EVC bridge-domain MEP on a remote device
You configure a MIP on a trunk EFP on an intermediate device.
You issue the traceroute command to the remote MEP
Remove an EVC member link from a port-channel interface
Configure a trunk EFP -Set the interface to default
Add the EVC member link back into the port-channel interface
Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router
Caveats in Cisco IOS XE 3.7S Releases
53

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents