Control Panel - Grizzly G0756 Owner's Manual

A. Spindle Speed Levers: used to get spindle
speed at available rpMs.
b. coolant Pump Switch: turns pump on,
sending coolant to nozzle
c. high/Low Spindle Speed Range Switch:
selects high/low range for spindle speed.
D. Spindle Rotation Switch: Controls direction.
E. Spindle Stop button: stops all work.
-4-

control Panel

A
B
C
d
e
figure 1. Control panel
F
g
h
i
f. Working Lamp Switch: turns work light on
or off.
G. EMERGENcy STOP button: immediately
cuts power to motor and control panel when
pressed. remains depressed until button is
reset by twisting clockwise.
h. Drilling/Tapping Switch: selects between
drilling and tapping modes.
I. Spindle Start button: starts machine when
Master power switch has already been
turned to the on position and the high/low
spindle speed range switch is turned to 1 or
2.
Model G0756 (Mfg. Since 2/13)