Section 5: Accessories - Grizzly G0756 Owner's Manual

SEcTION 5: AccESSORIES

Installing unapproved accessories may
cause machine to malfunction, resulting in
serious personal injury or machine damage.
To reduce this risk, only install accessories
recommended for this machine by Grizzly.
NOTICE
Refer to our website or latest catalog for
additional recommended accessories.
G5753—Drill Press vise - 6"
if you use a drill press and value your fingers, you
need one of these. Made from high-grade cast
iron, these hefty horizontal vises offer support
and stability, allowing you to keep your hands well
away from fast moving bits and cutters. includes
a sturdy lip along both sides of the base, allowing
vise to be mounted to nearly any machine table,
using common t-slot clamps.
figure 26. Cast iron drill press vice.
order online at
Model G0756 (Mfg. Since 2/13)
www.grizzly.com
G1075—52-Pc. clamping Kit
this clamping kit includes 24 studs, 6 step block
pairs, 6 t-nuts, 6 flange nuts, 4 coupling nuts, and
6 end hold-downs. the rack is slotted so it can be
mounted close to the machine for easy access.
Made for ⁄ " t-slots.
1
2
figure 27. Clamping Kit.
T20501—face Shield crown Protector 4"
T20502—face Shield crown Protector 7"
T20503—face Shield Window
T20452—"Kirova" Anti-Reflective S. Glasses
T20451—"Kirova" clear Safety Glasses
h0736—Shop fox Safety Glasses
®
h7194—bifocal Safety Glasses 1.5
h7195—bifocal Safety Glasses 2.0
h7196—bifocal Safety Glasses 2.5
figure 28. safety glasses.
1-800-523-4777
or call
-29-