Section 3: Setup; Unpacking; Needed For Setup; Inventory - Grizzly G0756 Owner's Manual

Industrial drill press
Table of Contents

Advertisement

Unpacking

Your machine was carefully packaged for safe
transportation. Remove the packaging materials
from around your machine and inspect it. If you
discover any damage, please call us immediately
at (570) 546-9663 for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, inventory the contents.
SUFFOCATION HAZARD!
Keep children and pets away
from plastic bags or packing
materials shipped with this
machine. Discard immediately.

Needed for Setup

the following are needed to complete the setup
process, but are not included with your machine.
Description
Additional people ....................................... 1
safety glasses ........................ 1 per person
Cleaner/degreaser ..................... As needed
disposable shop rags ............... As needed
Forklift ......................................................... 1
lifting straps (rated 1500 lbs. Minimum) .. 1
steel Bar stock 1" x 3' ................................ 1
-12-

SEcTION 3: SETUP

Qty

Inventory

The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Inventory (see figure 3):
A. drill Chuck B16 3–16mm ............................ 1
b. drill Chuck Arbor Mt#4–B16 ...................... 1
c. spindle sleeve Mt#4–Mt#3 ...................... 1
D. spindle sleeve Mt#4–Mt#2 ...................... 1
E. Bottle for oil ............................................... 1
f.
drift Key ...................................................... 1
G. Chuck Key .................................................. 1
h. toolbox (not shown) ................................... 1
A
B
g
F
figure 3. toolbox inventory.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Model G0756 (Mfg. Since 2/13)
Qty
C
d
e

Advertisement

Table of Contents
loading

Table of Contents