Table of Contents
Advertisement
Button/LED
5.2
1. Main switch ON.
• The last sewing pattern to be sewn is loaded and the sewing pattern
5.3
Preconditions:
• The machine is in programming mode; the LED in the Ready button is
1. Press the +/- Function button until the display shows required sewing
24
Pos. Function
(8)
Buttons +/- Program
Changes parameters and navigates forward/backward.
(9)
Display function
Shows values of selected functions/programs.
(10)
Buttons +/- function
Changes values of functions/programs.
(11)
Selection button
Selects various functions. The corresponding function LED is lit.
(12)
Sewing pattern memory buttons
Memorizes seam patterns.
Switching on the sewing machine
number shown in the Program display.
Selecting sewing patterns
CAUTION
Damage to the needle if the sewing pattern size does not match
the clamping foot.
Check the clamping foot, adjust if needed.
unlit.
pattern number in the Function display.
Settings via software
Operating manual 512/532 Version 01.0 - 03/2013
Advertisement
Table of Contents
