Adjusting Hook Feet On The Button Clamp (Class 532) - Duerkopp Adler 512/532 Operating Manual

4.8
Fig. 8: Adjusting the hook feet on the button clamp - standard clamp
2
(1) - Hook foot right
(2) - Hook foot left
Fig. 9: Adjusting the hook feet on the button clamp - optional button clamp
2
(1) - Hook foot right
(2) - Hook foot left
It should be as easy as possible to push the button between the hook feet
on the button clamp and align the button.
However, the button must be safely clamped to avoid it twisting when you
feed in the material.
The stop (3) sets the opening width of the hook feet.
1. Switch on the automatic sewing machine.
2. Press the Ready button.
3. Press the Ready button.
4. Release the knurled screw (4).
20

Adjusting hook feet on the button clamp (class 532)

CAUTION
Risk of injury due to the needle tip and moving
parts
Exercise caution when adjusting the button clamp
with the automatic sewing machine switched on.
1
1
The clamp lifts; pedal ready for sewing.
The clamp remains raised, pedal locked.
Operating manual
(3) - Lever
(4) - Knurled screw
(3) - Lever
(4) - Knurled screw
Operating manual 512/532 Version 01.0 - 03/2013
4
3
4
3