Table of Contents
Advertisement
5.4.4 Converting backtack dimensions (class 512)
To convert the preset dimensions to the desired dimensions, apply the fol-
lowing formula:
Value to be set = (100 % : preset dimension) * desired value
Preset dimension in X direction = 16 mm
Example
Desired value in X direction = 10 mm
Value to be set = (100 % : 16 mm) * 10 mm = 62.5 %
5.5
1. Press the Selection button until the LED in the Speed icon is lit.
2. Press the +/- Function button until the desired speed is reached.
5.6
1. Press the Selection button until the LED in the Sewing pattern shape
2. Press the Ready button to confirm the sewing pattern.
3. Push the foot pedal forward.
4. Press the +/- Function buttons to sew 1 stitch each.
5. Press the Reset button.
6. Press the Selection button until the LED in the Sewing pattern shape
5.7
1. Press the Selection button until the LED in the No. Pattern icon is lit.
2. Press the +/- Function buttons until the Function display shows the
3. Press the Ready button.
5.8
Preconditions:
• Needle removed.
• Needle thread not threaded.
26
Setting the speed
Checking sewing patterns
icon is lit.
The Program display shows the current sewing pattern shape.
The LED in the Ready button is lit.
The clamp is lowered.
The Function display shows the current number of stitches.
The clamp is raised.
icon is lit.
Changing sewing patterns
desired sewing pattern number.
Winding
Settings via software
Operating manual 512/532 Version 01.0 - 03/2013
Advertisement
Table of Contents
