Installation; Checking Table Tops; Assembling The Frame - Duerkopp Adler 512/532 Operating Manual

8.3

8.3.1 Checking table tops

8.3.2 Assembling the frame

Fig. 18: Assembling the frame
Assembling the individual frame components.
48

Installation

CAUTION
Risk of injury due to insufficient load-bearing
capacity of self-made table top
Make sure that the table top has the required load-
bearing capacity and strength.
Cut-outs in any table tops you create yourself must
have the dimensions given in the drawing (see Ap-
pendix).
3
(1) - Frame strut
(2) - Pedal
Installation Instructions
2
(3) - Adjusting screw
Operating manual 512/532 Version 01.0 - 03/2013
1