Olivetti ECR 2200 Instructions Manual page 32

Exiting the Calcula Exiting the Calcula tor Mode tor Mode
Exiting the Calculator Mode Exiting the Calcula Exiting the Calcula tor Mode tor Mode
Proceed as follows to exit from the calculator mode:
1. Slide the control switch to the R1 or R2 position.
2. Hold down the [C] key and press the [Amt Tend/TOTAL] key.
3. The decimal point will disappear from the display indicating that
you are now back into the normal register mode.
Assigning the Calcula Assigning the Calcula Assigning the Calcula Assigning the Calcula Assigning the Calculator Mode P tor Mode P tor Mode P tor Mode P tor Mode Passw
Proceed as follows to assign a password that prevents unauthorized
access to the functions provided by the calculator mode:
1. Slide the control switch to the PRG position.
2. Type [8], enter the [4-digit number] which will be your calculator
mode password and then press the [RA/ ] key.
NOTE: The 4-digit number cannot be 0000.
3. Slide the control switch to the OFF position to exit the PRG mode.
Example: Define calculator mode password 1962.
Type/Press:
[8] + [1962] + [RA/ ]
Accessing the Calcula Accessing the Calcula Accessing the Calcula Accessing the Calcula Accessing the Calculator Mode Pr tor Mode Protected b tor Mode Pr tor Mode Pr tor Mode Pr
P P P P P assw assw asswor or or or ord d d d d assw
assw
Proceed as follows to access a password protected calculator mode:
1. Slide the control switch to the R1 or R2 position.
2. Enter the four-digit calculator mode password.
3. Hold down the [C] key and press the [Amt Tend/TOTAL] key.
4. A decimal point will appear on the display indicating that the
calculator mode is in operation.
asswor or or or ord d d d d assw assw assw
otected by a otected b otected b otected b y a y a y a y a
The Non-Pr The Non-Pr int Mode int Mode
The Non-Pr The Non-Print Mode The Non-Pr int Mode int Mode
This cash register model can be programmed to be in the non-print
mode. This mode will stop the printing of sales transactions in the R2
(Receipt) mode. While in the non-print mode, the sales totals will be
maintained and the management reports will print. This feature is
useful for those times when a receipt tape is not required yet you need
to keep track of sales totals.
Activa a a a a ting the Non-Pr Activ Activ ting the Non-Pr ting the Non-Print Mode ting the Non-Pr int Mode int Mode int Mode
Activ Activ ting the Non-Pr int Mode
Proceed as follows to activate the non-print mode:
1. Slide the control switch to the PRG position.
2. If a security code has been assigned, enter this code and then press
the [Charge] key.
3. Type [6] followed by [1], and then press the [RA/ ] key. The
non-print mode is now activated and no printing will occur in the
R2 mode.
4. Continue with other programming or slide the control switch to
another position.
T T T T T ur ur ur ur urning Of ning Of ning Of ning Off the Non-Pr ning Of f the Non-Pr f the Non-Pr f the Non-Pr f the Non-Print Mode int Mode int Mode int Mode int Mode
Proceed as follows to deactivate the non-print mode:
1. Slide the control switch to the PRG position.
2. If a security code has been assigned, enter this code and then press
the [Charge] key.
3. Type [6] followed by [0], and then press the [RA/ ] key. The
non-print mode is now turned off and printing will occur in the R2
mode.
4. Continue with other programming or slide the control switch to
another position.
25