Olivetti ECR 2200 Instructions Manual page 31

Using the Cash Reg Using the Cash Reg ister in a P ister in a P
Using the Cash Reg Using the Cash Reg Using the Cash Register in a P ister in a P ister in a Passw
Mode Mode Mode Mode Mode
Using the P Using the P assw asswor or or or ord to assw d to d to
Using the P Using the P Using the Passw assw d to d to Access the Pr
If a manager password was defined to protect unauthorized access to
the PRG mode, proceed as follows to enter the specific password so
that you can work normally in this mode:
1. Slide the control switch to the PRG position.
2. Type the specific 4-digit password.
3. Press the [Charge] key.
Using the P Using the P assw asswor or or or ord to assw d to d to
Using the P Using the Passw Using the P assw d to d to Access the Z Management
Mode Mode Mode Mode Mode
If a manager password was defined to protect unauthorized access to
the Z mode, proceed as follows to enter the specific password so that
you can work normally in this mode:
1. Slide the control switch to the Z position.
2. Type the specific 4-digit password.
3. Press the [Amt Tend/TOTAL] key.
24
asswor or or or ord Pr assw assw d Pr d Pr otected otected
assw d Pr d Protected otected otected
Access the Pr Access the Pr ogram Mode ogram Mode
Access the Pr Access the Program Mode ogram Mode ogram Mode
Access the Z Management Access the Z Management
Access the Z Management Access the Z Management
Calcula Calcula tor Mode tor Mode
Calcula Calculator Mode Calcula tor Mode tor Mode
The calculator mode is a non-print mode that allows the use of the
numeric keys with the plus, minus, multiply, division and equal keys.
The [C] key can also be used in this mode. The calculator mode puts
the convenience of a calculator right at your fingertips and is useful
when a quick calculation is needed.
The calculator mode can only be accessed in the R1 or R2 position. It
cannot be accessed in the X or Z position nor in the middle of a sales
transaction.
If desired, you can assign a calculator mode password to restrict
access to this mode. If a password is assigned, an error tone will sound
if an attempt is made to enter the calculator mode without entering the
password.
In the calculator mode, the operational keys are limited to the
following:
[C]
[Amt Tend/TOTAL]
[Department 1/7]
[Department 4/10]
[Department 2/8]
[Department 5/11]
[Numeric keys 0-9]
Enter Enter Entering the Calcula Enter Enter ing the Calcula ing the Calculator Mode ing the Calcula ing the Calcula tor Mode tor Mode tor Mode tor Mode
Proceed as follows to enter into the calculator mode:
1. Slide the control switch to the R1 or R2 position.
2. Hold down the [C] key and press the [Amt Tend/TOTAL] key.
3. The decimal point will appear on the display indicating that the
calculator mode is in operation.
Clear
=
+
-
x
+