Olivetti ECR 2200 Instructions Manual page 18

Table of Contents

Enlarged version

The Ink Roller

This register comes equipped with the ink roller installed. The ink

roller releases special ink to the printhead which produces a printout on

the paper. After a period of time, depending on the usage, the ink in the

ink roller will be used up. When printing becomes faint, the ink roller

needs to be replaced.

NOTE: The ink roller is NOT designed to be re-inked. Under no

circumstances should this be done or permanent damage to

your cash register printhead will result.

Installing the Ink Roller

Proceed as follows to install the ink roller:

1. Unlock, open and remove the printer compartment cover.

2. The ink roller is found in front of the printhead mounted in a plastic

cartridge. To remove the roller, grasp the small clip on the on the

left of the ink roller and pull up. The ink roller will easily pull away

from the printhead.

3. To install a new ink roller, insert the ink roller according to the

markings "L" (Left) and "R" (Right) by pressing downward to lock

it into position.

4. Reposition, close and lock the printer compartment cover.

For best performance, store an unopened ink roller package in a cool,

dry place.

P P P P P a a a a a per

per T T T T T a a a a a pe

per

This cash register uses standard 2 1/4" (57 mm) calculator paper. The

paper needs to be changed when a red line appears on the tape.

Table of Contents

Show Quick Links

Table of Contents

Ecr 2100 Ecr 2200 euro Ecr 2100 euro