Olivetti ECR 2200 Instructions Manual page 21

Pr Pr Pr Pr Programming the Eur ogramming the Eur ogramming the Eur
ogramming the Eur ogramming the Euro as the Cash Reg
Base Curr Base Curr Base Curr Base Curr Base Currenc enc enc ency y y y y enc
By default the cash register is programmed to work with your
currency as the base currency. If you wish to perform sales transactions
in Euro, you need to reprogram the cash register's base currency.
Proceed as follows to do so:
1. Open the printer compartment and slide the control switch to the
PRG position.
2. Type [14] followed by [1] and then press the [RA/ ] key.
3. Slide the control switch to either the R1 or R2 position and then
refit, close and lock the printer compartment cover.
Helpful Hints f Helpful Hints f Helpful Hints for a Successful Star or a Successful Star or a Successful Start-Up or a Successful Star
Helpful Hints f Helpful Hints f or a Successful Star
This cash register has up to 12 departments available. You may
assign the taxable status to any other department by repeating the tax
assignment procedure used for Department 1. For departments 7-12,
press the [Dept Shift] key before the applicable department key. For
example, to select Department 10 press [Dept Shift] followed by the
[Department 4/10] key.
It is not necessary to re-program the entire machine to make a single
program change or correction. If you wish to make a change, such as an
update on a VAT rate, be sure that you are in the program mode, then
re-do the program in question. A new program entry will automatically
override a previous entry.
Remember that you enter into the program mode by moving the
control switch to the PRG position.
Be sure to slide the control switch to the OFF position at the end of a
business day.
In order to ensure continuous battery back-up protection, it is
important that the batteries be changed at least once every year.
14
o as the Cash Reg o as the Cash Reg ister's ister's
o as the Cash Register's o as the Cash Reg ister's ister's
t-Up t-Up t-Up
t-Up
Cash Register Pr Cash Reg Cash Reg Cash Reg Cash Reg ister Pr ister Pr ister Pr ister Programming ogramming ogramming ogramming ogramming
This cash register can be programmed to tailor its features according
to your specific needs. This programming facility allows you to:
• Define three-digit secret codes for each of the 6 programmable
clerks
• Set the date and time
• Set percent discount (-%) rates
• Define decimal point positions
• Define up to four VAT rates
• Define a department tax status
• Define Price Look-Ups (PLUs) for individual items
• Set an exchange rate for the Euro
• Program the different system options available
• Define a calculator mode password
• Define a manager password for the PRG and Z modes.
Set some of or all of the above features, depending on your business
needs. These program settings will reside in the cash register's memory
until you change them or deactivate the battery back-up system.
Setting Cash Register F Setting Cash Reg Setting Cash Reg ister F ister Fea ister F
Setting Cash Reg Setting Cash Reg ister F
All cash register features are programmed by first switching the
cash register into the program (PRG) mode by using the control
switch located in the printer compartment.
This chapter provides simple step-by-step procedures on how to
program the cash register. An example is provided after each procedure.
It is suggested that you first run through all the examples to become
familiar with the cash register's programming facilities, then program
the cash register according to your own specific needs.
eatur ea ea tures tur tur es es es es
ea tur