Cabling To An Hdtv For Video; Figure 14 - Cabling To An Hdtv - Motorola QIP7000 (P2) Series Installation Manual

Installation

Cabling to an HDTV for Video

For the best possible HDTV video quality:
1. If the TV has an HDMI input, connect it to the QIP7000 series HDMI output. If the TV
has a DVI input, you can connect it to the QIP7000 series HDMI output using and
HDMI-to-DVI converter cable or adapter.
2. If the TV has neither an HDMI nor a DVI input but has an IEEE-1394 input, connect it
to the QIP7000 series IEEE-1394 output. If you use IEEE-1394, on-screen graphics
do not display.
3. Otherwise, use the component video (Y, Pb, and Pr) connectors.
•
L/R audio connection or digital audio S/PDIF connection is required for sound with
component video.
Note: Be sure to match up each signal to the same connection on the TV. Otherwise,
the colors will not appear correctly on your TV.
Note: Because HDMI provides both video and audio output, no additional audio
connections to the TV are required.
QIP7000 (P2) Series Hybrid QAM/IP HD Set-top Terminal • Installation Manual
574702-001 a
Figure 14 – Cabling to an HDTV
This document is uncontrolled pending incorporation in a Motorola CMS
B
23