Diagnostics
d10 Audio/Video Status
Audio/Video Status diagnostics display information regarding audio and video content
and settings configured for the set-top.
The Audio/Video Status fields are:
Field
AUDIO SPDIF
LFE: Low Frequency
Effect
QIP7000 (P2) Series Hybrid QAM/IP HD Set-top Terminal • Installation Manual
574702-001 a
Description
Indicates S/PDIF Mode as set by application software.
OSD Display
N/A
Audio S/PDIF mode is not applicable.
IEC958PCM
PCM audio selected.
Dolby Digital
For Dolby Digital selection, the following speaker selection is set:
1/0
right front or left front.
2/0
right front and left front.
3/0
right front and left front and center.
2/1
right front and left front and (right rear or left rear).
3/1
right front and left front and center and (right rear or left rear).
2/2
right front and left front and right rear and left rear.
3/2
right front and left front and center and right rear and left rear.
The LFE indicates if the nomenclature low frequency effects are available in the Dolby
Digital audio stream as indicated if the '0.1' is present in the Dolby Digital 5.1
nomenclature (for example, 'Dolby 5.1 Digital surround'). Valid values include:
OSD Display
This document is uncontrolled pending incorporation in a Motorola CMS
B
57