Table of Contents
Advertisement
Installation
Connecting Homes with Multiple Existing Cable Drops
Some customer premises may have multiple coaxial inputs from one or more taps,
typically entering different locations in the home. For the PON, it is practical to have one
connection only per customer premises. You must use a splitter and cabling to connect
any additional drops to the ONT. The routing will depend on the layout of the home and
customer preference.
Connecting the Home Router
To connect the home router:
Connect the Ethernet cable you routed from the ONT to one of the Ethernet ports on the
home router.
Be sure the router is powered on.
Enable Dynamic Host Configuration Protocol (DHCP) on the router. Follow the
instructions provided with the router.
Connecting the Home Router - embedded MoCA ONT
To connect the home router:
Connect the coaxial cable you routed from the ONT to the coax/MoCA port on the home
router.
Be sure the router is powered on.
Enable Dynamic Host Configuration Protocol (DHCP) on the router. Follow the
instructions provided with the router.
QIP7000 (P2) Series Hybrid QAM/IP HD Set-top Terminal • Installation Manual
574702-001 a
This document is uncontrolled pending incorporation in a Motorola CMS
B
21
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
