Table of Contents
Advertisement
Connecting Your RNG Set-top
Connecting HDTV — Separate Video/Audio Connections
Cable In
Connect an RF coaxial cable to the cable wall outlet and the CABLE IN connector on the
RNG set-top.
DVI
If your TV has a DVI input, use the DVI connection for your video, connect a HDMI-to-DVI
adapter or cable to the HDMI out connector on the RNG set-top and the DVI-HDTV
connector on your TV.
Note: A DVI connection supports only the video connection between the RNG set-top
and the HDTV.
To connect your audio connections with your TV speakers, go to Audio section below.
To connect your audio connections for an A/V receiver, go to Connecting Your RNG Set-
top to an A/V Receiver — Audio
Component Video (YPbPr)
Connect the component video cables to the Y, Pb, and Pr connectors on your HDTV and
RNG set-top.
Note: This connection supports only the high definition video connection between the
RNG set-top and the HDTV.
Note: Be sure to match up each signal to the same connection on the TV, otherwise the
colors will not appear correctly on your TV.
To connect your audio connections with your TV speakers, go to Audio section below.
To connect your audio connections for an A/V receiver, go to Connecting Your RNG Set-
top to an A/V Receiver — Audio
Audio
If your TV does not have digital audio inputs, connect the stereo audio cable to the audio
L/R connectors on the RNG200N set-top and the Audio L/R connectors on the HDTV.
If your TV supports a digital audio inputs, use the digital audio optical S/PDIF or coaxial
S/PDIF outputs instead of the audio L/R outputs. S/PDIF offers better audio quality,
including support for Dolby
For information on configuring your RNG set-top settings, go to Configuring the Audio,
Video, and Closed Caption Settings.
High-Definition All-Digital Dual Tuner DVR Set-top RNG200N • User Guide
365-095-16097-x.1 This document is uncontrolled pending incorporation in a Motorola CMS
.
.
®
Digital audio.
B
13
Hide quick links:
Advertisement
Table of Contents
