Connecting An Hdtv - Separate Video/Audio Connections; Cable In; Dvi; Component Video (Ypbpr) - Motorola RNG150N User Manual

Connecting an HDTV — Separate Video/Audio Connections

Cable In

Connect an RF coaxial cable to the cable wall outlet and the CABLE IN connector on the
RNG set-top and then choose one of the following:

DVI

If your TV has a DVI input, use the DVI connection for your video. Connect a HDMI-to-
DVI adapter or cable to the HDMI out connector on the RNG set-top and the DVI-HDTV
connector on your TV.
Note: A DVI connection supports only the video connection between the RNG set-top
and the HDTV.
To connect your audio connections with your TV speakers, see the
To connect your audio connections for an A/V receiver, see
—

Audio.

Component Video (YPbPr)

Connect the component video cables to the Y, Pb, and Pr connectors on your HDTV and
RNG set-top.
Note: This connection only supports the video connection between the RNG set-top and
the HDTV.
Note: Be sure to match up each signal to the same connection on the TV, otherwise the
colors will not appear correctly on your TV.
To connect your audio connections with your TV speakers, see the
To connect your audio connections for an A/V receiver, see
— Audio.
Audio
If your TV does not have digital audio inputs, connect the stereo audio cable to the audio
L/R connectors on the RNG150N set-top and the audio L/R connectors on the HDTV.
If your TV supports digital audio inputs, use the digital audio optical S/PDIF or coaxial
S/PDIF outputs instead of the audio L/R outputs. S/PDIF offers better audio quality,
including support for Dolby® Digital audio.
For information on configuring your RNG set-top settings, see
Settings.
High-Definition Digital STB RNG150N • User Guide
365-095-17388-x.2
Audio section.
Connecting an A/V Receiver
Audio section.
Connecting an A/V Receiver
Configuring the User
B
12