Motorola QIP7000 (P2) Series Installation Manual page 58

Diagnostics
Field
Preview
MPEG Video
Lock
MPEG Audio
Lock
PCR Lock
CCI
APS
RC Flag
CIT
DRM
RS
QIP7000 (P2) Series Hybrid QAM/IP HD Set-top Terminal • Installation Manual
574702-001 a
Description
NO Off
Indicates whether the current program is in preview mode:
OSD Front Panel
YES On
NO Off
Indicates whether the video processor is locked to the video stream:
YES — locked
NO — not locked
Indicates whether the audio processor is locked to the audio stream:
YES — locked
NO — not locked
Indicates whether the in-band receiver is locked to the program clock reference
(PCR):
YES — locked
NO — not locked
The copy control information:
00 — copy free
01 — no more copies
10 — copy once
11 — never copy
N/A — the value is invalid or cannot be retrieved
The Analog Protection System; for example, Macrovision:
00 — No Macrovision
11 — Type 3 Macrovision
N/A — the value is invalid or cannot be retrieved
Displays whether the broadcast flag is present:
0 — no flag/not defined
1 — the flag is present/enabled
N/A — the value is invalid or cannot be retrieved
The constrained image trigger as delivered in the PRK or the Set DRM API:
1 — set
0 — not set
N/A — the value is invalid or cannot be retrieved
The digital rights management valid flag bit:
1 — set
0 — not set
N/A — the value is invalid or cannot be retrieved
The retention state:
Forever, 1 week, 2 days, 1 day, 12 hours, 6 hours, 3 hours, 90 minutes, or
Not Defined
N/A — the value is invalid or cannot be retrieved
This document is uncontrolled pending incorporation in a Motorola CMS
Cannot be purchased
Description
In preview mode
Not in preview mode
B
50