Separable Security - Motorola QIP7000 (P2) Series Installation Manual

Diagnostics
The Unit Address fields are:
Field
TvPC Installed Indicates whether the TvPC renewable security system is installed:
CableCARD
Inserted
Unit Address
OOB Addresses
Network
Multicast 16
Address
Serial Number The Host Serial Number is displayed on the Unit Address diagnostic screen.
MAC
Addresses

Separable Security

This diagnostic displays information on the inserted M-CARD and CableCARD Interface
with the QIP.
QIP7000 (P2) Series Hybrid QAM/IP HD Set-top Terminal • Installation Manual
574702-001 a
Description
NO — TvPC is not installed (Note: the QIP7000 series does not include a TvPC slot)
YES — CableCARD is inserted
NO — CableCARD is not inserted
A unique decimal number that indicates the unit address or physical address.
The QIP7000 series network address displayed in decimal format.
Specifies the stream to which the OOB multicast 16 addresses are assigned. The stream
type and multicast 16 addresses cycle on the OSD every 5 seconds. The valid stream types
are:
•
Net — Network
•
EMM — EMM
•
SCC — SCC_ECM
•
Dnld — Download
•
Data — Data
•
Poll — Polling packet identifier (PID)
The 16-bit multicast address is displayed in 4-byte hexadecimal format. The Multicast 16
addressed messages filter on a 16-bit multicast address. The user processor can define up
to four multicast addresses in hardware, and any message matching one of the four is
processed. Messages not matching the multicast address are discarded.
The MoCA, Ethernet, 1394, USB, and MAC addresses are stored in protected flash and
displayed in hexadecimal.
This document is uncontrolled pending incorporation in a Motorola CMS
B
46