Table of Contents
Advertisement
3 CONNECTING YOUR DCX SET-TOP
Connecting HDTV — Separate Video/Audio Connections
Cable In
Connect an RF coaxial cable to the cable wall outlet and the CABLE IN
connector on the DCX set-top and then choose one of the following:
DVI
If your TV has a DVI input, use the DVI connection for your video,
connect a HDMI-to-DVI adapter or cable to the HDMI out connector on
the DCX set-top and the DVI-HDTV connector on your TV.
Note: A DVI connection supports only the video connection between
the DCX set-top and the HDTV.
To connect your audio connections with your TV speakers, go to
on the next page.
To connect your audio connections for an A/V receiver, go to
an A/V Receiver —
Component Video (YPbPr)
Connect the component video cables to the Y, Pb, and Pr connectors
on your HDTV and DCX set-top.
Note: This connection only supports the video connection between the
DCX set-top and the HDTV.
Note: Be sure to match up each signal to the same connection on the
TV, otherwise the colors will not appear correctly on your TV.
To connect your audio connections with your TV speakers, go to
on the next page.
To connect your audio connections for an A/V receiver, go to
an A/V Receiver —
Audio.
Audio.
11
Audio
Connecting
Audio
Connecting
Advertisement
Table of Contents
