The Log Settings Screen - ZyXEL Communications 802.11 a/g User Manual

Click Logs > View Log. The following screen displays.
Figure 140 Logs > View Log
The following table describes the labels in this screen.
Table 73 Logs > View Log
LABEL
Display
Time
Message
Source
Destination
Notes
Email Log Now
Refresh
Clear Log

19.5 The Log Settings Screen

Use this screen to configure where and when the NWA will send the logs, and
which logs and/or immediate alerts to send.
NWA-3500/NWA-3550 User's Guide
DESCRIPTION
Select a log category from the drop down list box to display logs
within the selected category. To view all logs, select All Logs.
The number of categories shown in the drop down list box depends
on the selection in the Log Settings page.
This field displays the time the log was recorded.
This field states the reason for the log.
This field lists the source IP address and the port number of the
incoming packet.
This field lists the destination IP address and the port number of the
incoming packet.
This field displays additional information about the log entry.
Click Email Log Now to send the log screen to the e-mail address
specified in the Log Settings page.
Click Refresh to renew the log screen.
Click Clear Log to clear all the logs.
Chapter 19 Log Screens
229