ZyXEL Communications 802.11 a/g User Manual page 105

Select the NWA managed APs from the Un-Managed Access Points List as
2
shown in the screen above. You can also identify these managed APs by filling in
the Description field. Click Add.
The 2nd, 3rd and 4th floor NWA managed APs (B, C and D) should now be in the
3
Manged Access Points List. By default, newly added managed APs in the list
have their WLAN Radio Profile set to disabled. This means that their wireless
functions are turned off.
Note: The NWA controller AP uses WLAN Radio Profile to categorize different
wireless settings present in a managed AP. Each profile contains the SSID,
security mode, RADIUS, Layer-2 Isolation and MAC filter configurations.
Turn on a WLAN Radio Profile by selecting the managed AP from the list and
clicking Edit.
Figure 69 Tutorial:AP List (Managed)
In the screen that opens, choose the radio profile for each WLAN radio and click
4
Apply.
Figure 70 Tutorial: Managed AP WLAN Radio Profile
NWA-3500/NWA-3550 User's Guide
Chapter 6 Tutorial
105