Radius Vlan Screen - ZyXEL Communications 802.11 a/g User Manual

20.4.1 RADIUS VLAN Screen

Use this screen to configure your RADIUS Virtual LAN setup. Click VLAN >
RADIUS VLAN. The following screen appears.
Figure 144 VLAN > RADIUS VLAN
The following table describes the labels in this screen.
Table 80 VLAN > RADIUS VLAN
LABEL
Block station if
RADIUS server
assign VLAN name
error!
VLAN Mapping Table Use this table to map names to VLAN IDs so that the RADIUS server
ID
NWA-3500/NWA-3550 User's Guide
DESCRIPTION
Select this to have the NWA forbid access to wireless clients when
the VLAN attributes sent from the RADIUS server do not match a
configured Name field.
When you select this check box, only users with names configured in
this screen can access the network through the NWA.
can assign each user or user group a mapped VLAN ID. See your
RADIUS server documentation for more information on configuring
VLAN ID attributes.
See Section 20.5.3 on page 243
Select a check box to enable the VLAN mapping profile.
Type a VLAN ID. Incoming traffic from the WLAN is authorized and
assigned a VLAN ID before it is sent to the LAN.
Chapter 20 VLAN
for more information.
239