ZyXEL Communications 802.11 a/g User Manual page 238

Chapter 20 VLAN
The following table describes the labels in this screen
Table 79 VLAN > Wireless VLAN
FIELD
Enable VIRTUAL LAN
Management VLAN ID
VLAN Mapping Table
Index
Name
SSID
VLAN ID
Second Rx VLAN ID
Apply
Reset
238
DESCRIPTION
Select this box to enable VLAN tagging.
Enter a number from 1 to 4094 to define this VLAN group.
At least one device in your network must belong to this
VLAN group in order to manage the NWA.
Note: Mail and FTP servers must have the same
management VLAN ID to communicate with the
NWA.
See Section 20.5.2 on page 240
Use this table to have the NWA assign VLAN tags to packets
from wireless clients based on the SSID they use to
connect to the NWA.
This is the index number of the SSID profile.
This is the name of the SSID profile.
This is the SSID the profile uses.
Enter a VLAN ID number from 1 to 4094. Packets coming
from the WLAN using this SSID profile are tagged with the
VLAN ID number by the NWA. Different SSID profiles can
use the same or different VLAN IDs. This allows you to split
wireless stations into groups using similar VLAN IDs.
Enter a number from 1 to 4094, but different from the
VLAN ID. Traffic received from the LAN that is tagged with
this VLAN ID is sent to all SSIDs with this VLAN ID
configured in the VLAN ID or Second Rx VLAN ID fields.
See Section 20.5.4 on page 253
Click this to save your changes to the NWA.
Click this to return this screen to its last-saved settings.
for more information.
for more information.
NWA-3500/NWA-3550 User's Guide