Table 43 Wireless > Security: 802.1x Static 64-bit, 802.1x Static 128-bit
LABEL
ReAuthentication
Timer
Idle Timeout
Apply
Reset
10.4.4 Security: WPA
Use this screen to set the selected profile to Wi-Fi Protected Access (WPA) security
mode.Select WPA in the Security Mode field to display the following screen.
Figure 97 Wireless > Security: WPA
The following table describes the labels in this screen.
Table 44 Wireless > Security: WPA
LABEL
Profile Name
Security Mode
NWA-3500/NWA-3550 User's Guide
DESCRIPTION
Specify how often wireless stations have to resend user names and
passwords in order to stay connected.
Enter a time interval between 10 and 9999 seconds. The default time
interval is 1800 seconds (30 minutes). Alternatively, enter "0" to turn
reauthentication off.
Note: If wireless station authentication is done using a RADIUS
server, the reauthentication timer on the RADIUS server
has priority.
The NWA automatically disconnects a wireless station from the wired
network after a period of inactivity. The wireless station needs to
enter the user name and password again before access to the wired
network is allowed.
The default time interval is 3600 seconds (or 1 hour).
Click Apply to save your changes.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
Type a name to identify this security profile.
Choose WPA in this field.
Chapter 10 Wireless Security Screen
155