DHCP Option 43 allows the CAPWAP management request (from the AP in
managed AP mode) to reach the AP controller in a different subnet, as shown in
the following figure.
Figure 18 CAPWAP and DHCP Option 43
SUBNET 1
CONTROLLER
(STATIC IP)
4.1.4 Notes on CAPWAP
This section lists some additional features of ZyXEL's implementation of the
CAPWAP protocol.
• When the AP controller uses its internal RADIUS server, managed APs also use
the AP controller's authentication server to authenticate wireless clients.
• Only one AP controller can exist in any single broadcast domain.
• If a managed AP's link to the AP controller is broken, the managed AP continues
to use the wireless settings with which it was last provided.
4.2 The Management Mode Screen
Use this screen to configure the NWA as a CAPWAP controller AP or CAPWAP
managed AP or to use it in its default standalone mode.
NWA-3500/NWA-3550 User's Guide
CAPWAP
TRAFFIC
AP
Chapter 4 Management Mode
SUBNET 2
DHCP
SERVER
+ OPTION 43
MANAGED
AP
(DYNAMIC
IP)
49