ZyXEL Communications 802.11 a/g User Manual page 271

The following table describes the labels in this screen.
Table 88 Maintenance > F/W Upload
LABEL
File Path
Browse...
Upload
Do not turn off the NWA while firmware upload is in progress!
After you see the Firmware Upload in Process screen, wait two minutes before
logging into the NWA again.
Figure 177 Firmware Upload In Process
The NWA automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your
desktop.
Figure 178 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the
System Status screen.
NWA-3500/NWA-3550 User's Guide
DESCRIPTION
Type in the location of the file you want to upload in this field or click
Browse ... to find it.
Click Browse... to find the .bin file you want to upload. Remember
that you must decompress compressed (.zip) files before you can
upload them.
Click Upload to begin the upload process. This process may take up
to two minutes.
Chapter 23 Maintenance
271