ZyXEL Communications 802.11 a/g User Manual page 300

Appendix A Setting Up Your Computer's IP Address
The Internet Protocol Version 4 (TCP/IPv4) Properties window opens.
7
Figure 197 Windows Vista: Internet Protocol Version 4 (TCP/IPv4) Properties
Select Obtain an IP address automatically if your network administrator or ISP
8
assigns your IP address dynamically.
Select Use the following IP Address and fill in the IP address, Subnet mask,
and Default gateway fields if you have a static IP address that was assigned to
you by your network administrator or ISP. You may also have to enter a Preferred
DNS server and an Alternate DNS server, if that information was
provided.Click Advanced.
Click OK to close the Internet Protocol (TCP/IP) Properties window.
9
Click OK to close the Local Area Connection Properties window.
Click Start > All Programs > Accessories > Command Prompt.
1
In the Command Prompt window, type "ipconfig" and then press [ENTER].
2
You can also go to Start > Control Panel > Network Connections, right-click a
network connection, click Status and then click the Support tab to view your IP
address and connection information.
300
Verifying Settings
NWA-3500/NWA-3550 User's Guide