ZyXEL Communications 802.11 a/g User Manual page 254

Chapter 20 VLAN
Click VLAN > Wireless VLAN.
2
If VLAN is not already enabled, click Enable Virtual LAN and set up the
3
Management VLAN ID (see
Note: If no devices are in the management VLAN, then no one will be able to access
the NWA and you will have to restore the default configuration file.
Select the SSID profile you want to configure (SSID03 in this example), and enter
4
the VLAN ID number (between 1 and 4094).
Enter a Second Rx VLAN ID. The following screen shows SSID03 tagged with a
5
VLAN ID of 3 and a Second Rx VLAN ID of 4.
Figure 165 Configuring SSID: Second Rx VLAN ID Example
Click Apply to save these settings. Outgoing packets from clients in SSID03 are
6
tagged with a VLAN ID of 3, and incoming packets with a VLAN ID of 3 or 4 are
forwarded to SSID03.
254
Section 20.5.2 on page
NWA-3500/NWA-3550 User's Guide
240).